CM 2215 Quizzes | Questions with 100% Correct Answers

Document Content and Description Below

CM 2215 Quizzes | Questions with 100% Correct Answers OSHA stands for the Occupational Safety and _____ Administration Health OSHA’s mission is to ___ lives and prevent injuries Save OSHA’s thre... e main functions consist of ____, _____, and ____ enforcement, outreach, information OSHA enforces its regulations through ____ Inspections OSHA was signed into law by president _____ Nixon OSHA’s inspection priority is imminent danger, fatalities, _____, targeted, and follow-up Complaints A repeat citation can result in a fine up to $124,000 Section 5 (a) (1) of OSHA regulations is known as the ___ duty clause General OSHA ensures the rights of workers to a safe and healthful workplace All workers in the US are covered under OSHA except for government workers During the opening conference of an OSHA inspection, the CSHO will ___ ask for written documentation of your safety plan and records, allow verification of his credentials, and provide time for you to notify your boss After the opening conference, the second part of an OSHA inspector will conduct a ___ of the business walk through The third and final part of an OSHA inspection is the ___ closing conference If an OSHA CHSO reveals a trade secret that he learns while conducting an inspection, he may be fined up to $1000 and be jailed up to ___. 1 year If your company receives a citation from OSHA, you must post it near the violation If an OSHA inspector points out an easy-to-fix hazard during the walk around, you should___ fix it immediately An OSHA citation has to be posted for at least ___ days or until it’s fixed 3 OSHA will issue citations___ after the CSHO consults with his area director If you wish to contest a citation, you must do so within ___ days 15 If the inspector takes a picture during the inspection, you should ____ take your own picture If an OSHA inspector sees something on a jobsite that could result in a major injury to a worker, they can issue a ___ citation Serious If an OSHA inspector sees something on a jobsite that could result in the death of a worker, than can issue a ___ citation Serious If an OSHA inspector sees something on a jobsite that could result in a minor injury to a worker, they can issue a ⋯⋯⋯ citation. other than serious If an employer knowingly violates OSHA regulations, an OSHA inspector can issue a ⋯⋯⋯ citation. Willful If an employee refuses to follow company safety rules, OSHA can issue a citation to the ⋯⋯⋯ Company If a company is given an OSHA citation for an employee that refuses to follow safety rules, the company can provide a defense to OSHA by showing that ⋯⋯⋯. they have a written rule If a company is given an OSHA citation for an employee that refuses to follow safety rules, the company can provide a defense to OSHA by showing ⋯⋯⋯ they communicated through training If a company is given an OSHA citation for an employee that refuses to follow safety rules, the company can provide a defense to OSHA by showing they have a/an ⋯⋯⋯ discipline policy. Effective If a company is given an OSHA citation for an employee that refuses to follow safety rules, the company can provide a defense to OSHA by showing ⋯⋯⋯ they have a method to detect violations An OSHA inspector is officially designated a CSHO or ⋯⋯⋯ safety and health officer Compliance An example of direct costs for an injury could be ⋯⋯⋯ doctor's bills One typical full time worker will work for ⋯⋯⋯ hours per year. (Numerical Answer 2000 If a company's employees work 400,000 hours and have 18 accidents, its incident rate is ⋯⋯⋯. (Numerical Answer) 9 A slow down in productivity due to an accident is a/an ⋯⋯⋯ cost. (One Word Answer) Indirect Worker's comp premiums are calculated by multiplying payroll by a company's ⋯⋯⋯ rate. (One word answer) Basic Basic worker's comp rates are determined by its ⋯⋯⋯ code. (One word answer NAICS Worker's comp premiums can be adjusted by a company's individual ⋯⋯⋯ rating EMR If a company has 3 accidents, but its NAICS code expects it to have 4, its EMR is ⋯⋯⋯ 0.75 Using a sliding ratio of 4.5 for accidents between $0-2999, we estimate the total costs of an accident with direct costs of $100 to be ⋯⋯⋯ 550 If a company has a $550 total cost accident and a 10% profit margin, it will have to generate ⋯⋯⋯ in additional revenue dollars to cover the cost 5500 A/an _person means a person approved or assigned by the employer to perform a specific type of duty or duties or to be at a specific location or locations at the jobsite Authorized A/an __person is one who has passed stringent written and practical exams related to the work that he will perform. OSHA requires the organization providing the examinations be accredited by an accrediting agency such as the American National Standards Institute (ANSI). Certified A "Designated person" means the same as a /an __ person authorized A/an ___ person means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them. Competent A/an _person means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project. Qualified A ___ can cause someone to get injured or harmed Hazard Being close enough to a hazard to get hurt is known as _ to the hazard Exposure When you have a hazard and exposure to it, you have the potential for an ___ to occur Injury The most preferred method for controlling hazards is to ___ them from ever occurring Prevent According to OSHA's focus four accident types, we can predict that the most likely accident on a construction site to be a ___ from an upper surface. Fall When a hazard cannot be prevented, we will try to __ it as quickly as possible eliminate If you cannot prevent or eliminate a hazard, you must _ exposure to it Control Building a barricade around a hole is an example of an ___ control Engineering Telling employees to stay at least 10 feet away from a hole is an __ control Administrative Having employees wear a harness to stop them from falling in a hole is a ___ control PPE The goal of OSHA's construction inspections is to ⋯⋯⋯ in the safety and health of employees at the work site make a difference The Focused Inspection Initiative policy applies only to ⋯⋯⋯ companies. Construction To qualify for a focused inspection, the OSHA inspector must find project safety coordination by a / an ⋯⋯⋯ general contractor To qualify for a focused inspection, the OSHA inspector must also find a / an ⋯⋯⋯ what kind of plan adequate S&H plan To qualify for a focused inspection, the OSHA inspector must also find a / an ⋯⋯⋯ competent person If a company qualifies for a focused inspection, the OSHA inspector will typically only look for ⋯⋯⋯ hazard focus four If the OSHA inspector does not feel a company qualifies for a focused inspection, he will do a ⋯⋯⋯ inspection Comprehensive OSHA conducts focused inspections to allow for ⋯⋯⋯ better use of resources OSHA conducts focused inspections only at construction companies because ⋯⋯⋯ of the changing the nature of the jobsite The purpose of an OSHA directive, including enforcement and compliance directives, is to insure ⋯⋯⋯ enforcement of OSHA regulations Consistent [Show More]

Last updated: 2 hours ago

Preview 4 out of 11 pages