ASP Associate Safety Professional Exam 2023 with 100% correct answers

Document Content and Description Below

A 40 ton gantry crane has been out of service for more than 6 months for structural repair. It is required to be proof tested at ______?? Before being used? 50 tons A body that has a definite ... volume but no definite shape is? A liquid A cage on a fixed ladder on a commercial ladder cannot extend any closer than how many feet from the ground? OSHA 1910.27 "cages shall extend down the ladder to a point of not less than 7 feet or more than 8 feet above the base of the ladder". "A calorie is the amount of heat required to raise the temperature of one gram of water __________ BTU is the measure of energy and is the amount of heat required to raise temperature of one pound of water_______" "1 degree Celsius 1 degree Farenheit " A commercial motor vehicle transporting hazardous materials is required to display placards in which of the following locations? Front, rear and both sides of vehicle A fire resistive wall separating oxygen and fuel gases should be how high? About five feet A room designed for recharging of lead acid batteries does not require?? Pressure relief panels A solution contains 10-2 hydrogen ions per liter. What would this solution be considered? A strong acid Acclimatization to heat is generally achieved by requiring the employee to? Work for two hours per day for two weeks. New workers and those returning from a prolonged absence should begin with 20% of the workload on the first day, increasing incrementally by no more than 20% each subsequent day. During a rapid change leading to excessively hot weather or conditions such as a heat wave, even experienced workers should begin on the first day of work in excessive heat with 50% of the normal workload and time spent in the hot environment, 60% on the second day, 80% on day three, and 100% on the fourth day. Full acclimatization may take up to 14 days or longer depending on factors relating to the individual, such as increased risk of heat illness due to certain medications or medical conditions, or the environment. According to 1910.145, what is the minimum reading distance when posting a danger sign? Five feet According to ANSI Z89.1-1997 specifications for helmets (hardhats) to protect employees from impact of falling objects and from high voltage electrical shock. Which of the following classes offer low voltage protection? G According to OSHA 1910.217 "Mechanical Power Press" requires how much safe distance per second of stopping time from "point of operation devices" to ensure the safety of the operator? 63 inches or 5.25 feet According to OSHA HAZ Com; who has the responsibility to determine if a material is hazardous? The manufacturer or importer of the chemical [Show More]

Last updated: 1 year ago

Preview 1 out of 45 pages