Chapter 6 Wireless LANS I > Business Data Networks and Security, 11e (Panko) > 2019 Latest Exam > Already Graded A

Document Content and Description Below

1) Wireless network standards operate at ________. A) the data link layer B) the Internet layer C) both A and B D) neither A nor B Difficulty: Basic Question: 1a Objective: Describe basic Wi... -Fi technology and access points. AACSB: Applying Information Technology, Application of Knowledge 2) ________ is a wireless network standard. A) OSI B) TCP/IP C) both A and B D) neither A nor B Difficulty: Basic Question: 1b Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology, Application of Knowledge 3) Wi-Fi Standards come from the ________ Working Group. A) 802.1 B) 802.3 C) 802.11 D) 802.1X Difficulty: Basic Question: 2a Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology, Application of Knowledge 4) Wi-Fi is a term used by the ________. A) IEEE B) Wi-Fi Alliance C) both A and B D) neither A nor B Difficulty: Deeper Question: 2b Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology 5) We use the terms Wi-Fi and ________ interchangeably in this book. A) 802.1 B) 802.3 C) 802.11 D) 802.1X Difficulty: Basic Question: 2c Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology 6) In a Wi-Fi LAN, wireless hosts generally send frames directly to one another. Difficulty: Basic Question: 3a Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology 7) Wireless access points typically link wireless clients to ________. A) wireless servers B) servers on the wired network C) both A and B Difficulty: Deeper Question: 3b Objective: Describe basic Wi-Fi technology and access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 8) Compared to wired transmission, propagation problems in radio transmissions are ________. A) worse B) about as bad C) better Difficulty: Basic Question: 4a Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 9) Simple installation rules are sufficient to reduce propagation problems to nonissues in ________. A) 802.3 B) 802.11 C) both A and B D) neither A nor B Difficulty: Deeper Question: 4b Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 10) Wireless radio transmission speed is usually measured in terms of ________. A) wavelength B) frequency C) amplitude D) dollars Difficulty: Basic Question: 5b Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology 11) Frequency is measured in terms of ________. A) nanometers B) hertz C) microns D) microseconds Difficulty: Basic Question: 5c Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology 12) Most wireless systems operate in the ________ range. A) hz B) kHz C) MHz D) GHz Difficulty: Basic Question: 5d Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology 13) If another wireless device is near, but in an unknown direction, it is better to use ________. A) an omnidirectional antenna B) a dish antenna C) neither A nor B Difficulty: Basic Question: 6a Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 14) Wi-Fi normally uses a(n) ________. A) omnidirectional antenna B) dish antenna C) both A and B D) neither A nor B Difficulty: Basic Question: 6d Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology 15) If a signal has a strength of 100 mW at 10 meters, how strong will it be at 40 meters? A) about 0.5 mW B) about 5 mW C) about 25 mW D) about 6 mW Difficulty: Deeper Question: 7a Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 16) If a signal has a strength of 100 mW at 10 meters, how strong will it be at 100 meters? A) about 10 mW B) about 1 mW C) about 0.1 D) none of the above Difficulty: Deeper Question: 7b Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 17) If the signal strength from an omnidirectional radio source is 100 mW at 10 meters, how strong will it be at 30 meters, ignoring absorptive attenuation? A) about 30 mW B) about 11 mW C) about 4 mW D) about 0.1 mW Difficulty: Deeper Question: 7e Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 18) What propagation problem is especially bad in moist air? A) absorptive attenuation B) electromagnetic interference C) multipath interference D) inverse square law attenuation Difficulty: Deeper Question: 8a Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 19) What propagation problem becomes worse when there is a large, and dense, object between sender and receiver? A) multipath interference B) shadow zones (dead zones) C) inverse square law attenuation D) none of the above Difficulty: Basic Question: 8b Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 20) The most serious problem with wireless transmission in WLANs is ________. A) inverse square law attenuation B) absorptive attenuation C) shadow zones D) multipath interference Difficulty: Deeper Question: 8c Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 21) Multipath interference is mitigated through ________. A) broadband transmission B) MIMO C) beamforming D) spread spectrum transmission Difficulty: Basic Question: 8d Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking 22) What propagation problem becomes worse as frequency increases? A) inverse square law attenuation B) electromagnetic interference C) both A and B D) neither A nor B Difficulty: Deeper Question: 8e Objective: Describe physical layer radio transmission. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 23) The frequency spectrum extends ________. A) into the gigahertz range B) into the visible light range C) into the ultraviolet range D) to infinity Difficulty: Basic Question: 9a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 24) In Wi-Fi, 2.4 GHz and 5 GHz refer to ________. A) frequency spectrums B) broadbands C) channels D) none of the above. Difficulty: Deeper Question: 9a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 25) To handle multiple conversations in 802.11 transmission, you normally use multiple ________. A) channels B) frequencies C) service bands D) wires Difficulty: Basic Question: 9b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 26) The set of frequencies used for police communication in a city are ________. A) channels B) frequencies C) spectrums D) none of the above Difficulty: Deeper Question: 9d Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 27) An FM radio station is called Moldy Oldies 101.1. The 101.1 refers to its ________. A) single frequency B) channel C) service band D) none of the above Difficulty: Deeper Question: 9e Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 28) Wi-Fi operates in the 2.4GHz and 5GHz ________. A) frequencies B) spectrums C) channels D) service bands Difficulty: Basic Question: 9f Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 29) Signals in a transmission usually ________. A) travel at a single frequency B) spread over a range of frequencies C) spread over the entire frequency distribution D) spread over the entire service band Difficulty: Deeper Question: 10a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 30) What is the bandwidth of a channel that extends from 55 MHz to 60 MHz? A) 60 MHz B) 55 MHz C) 65 MHz D) none of the above Difficulty: Basic Question: 10b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 31) If you want to transmit 7 times as fast in radio, you need to use ________. A) channels that are about 7 times as wide B) channels that are about 49 times as wide C) spread spectrum transmission D) none of the above Difficulty: Basic Question: 10c Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 32) To transmit very rapidly in radio, you need ________. A) single-frequency transmission B) single-mode transmission C) wide bandwidth D) narrow bandwidth Difficulty: Basic Question: 10d Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 33) To transmit data very rapidly, you would want a ________ channel. A) narrowband B) broadband C) single-frequency band D) single-mode Difficulty: Basic Question: 10d Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 34) Channels with wide bandwidths are called ________ channels. A) multimode B) full-duplex C) broadband D) parallel Difficulty: Basic Question: 10e Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 35) The term "broadband" is commonly used for ________. A) wide radio bandwidths B) high-speed transmission in general C) both A and B D) neither A nor B Difficulty: Deeper Question: 10f Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 36) WLANs normally use ________. A) licensed bands B) unlicensed bands C) both A and B D) neither A or B Difficulty: Medium Question: 11a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 37) Many 802.11 standards work in the 5 GHz_____. A) licensed spectrum B) unlicensed spectrum C) licensed service band D) unlicensed service band Difficulty: Medium Question: 11a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 38) Wi-Fi standards use unlicensed bands for ________ A) greater speed B) greater standardization C) greater flexibility D) greater privacy Difficulty: Basic Question: 11b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 39) In unlicensed bands, ________. A) you can use radios wherever you please B) you can prevent nearby businesses from setting up access points in the same channel C) both A and B D) neither A nor B Difficulty: Deeper Question: 11b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 40) The downside of unlicensed bands is potential ________ A) speed loss B) loss of flexibility C) interference from others D) less-developed standards Difficulty: Deeper Question: 11c Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 41) Two access points that operate on the same channel will ________. A) bond B) coordinate their use of the channel C) interfere D) divide the available spectrum about equally Difficulty: Deeper Question: 12 Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 42) 802.11 operates in the ________ unlicensed service band. A) 2.4 MHz B) 60 MHz C) both A and B D) neither A nor B Difficulty: Basic Question: 13a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 43) The 2.4 GHz band supports ________ possible non-overlapping 20 MHz channel(s). A) 1 B) 3 C) 7 D) 11 Difficulty: Basic Question: 13b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 44) In general, the fewer the channels, ________. A) the greater the likelihood of interference between access points B) the smaller the individual channels will be C) both A and B D) neither A nor B Difficulty: Deeper Question: 13c Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking 45) Companies prefer the 5 GHz band because there is ________ than in the 2.5 GHz band. A) more bandwidth B) less absorptive attenuation C) both A and B D) neither A nor B Difficulty: Basic Question: 13d Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 46) If you triple channel bandwidth, what happens to the number of channels in a service band? A) It triples. B) It increases by a factor of nine. C) It is reduced a third. D) It is reduced a ninth. Difficulty: Deeper Question: 13e Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 47) Spread spectrum transmission is used in WLANs because ________. A) it is required by regulators B) it offers strong security C) both A and B D) neither A nor B Difficulty: Basic Question: 14a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 48) Spread spectrum transmission is used in WLANs for ________. A) higher transmission speed B) more reliable transmission C) greater security D) more efficient transmission Difficulty: Deeper Question: 14b Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 49) Spread spectrum transmission's wider channels brings ________. A) greater speed B) greater reliability C) greater security D) none of the above Difficulty: Basic Question: 14d Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology, Application of Knowledge 50) Which of the following uses OFDM? A) 802.11ac B) 802.11n C) both A and B D) neither A nor B Difficulty: Basic Question: 15a Objective: Explain the frequency spectrum, service bands and channels. AACSB: Applying Information Technology 51) Access points take ________ from wireless devices and send them on to devices on the wired LAN. A) packets B) frames C) both A and B D) neither A nor B Difficulty: Deeper Question: 16a Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 52) A wireless host sends a packet to a server on the company's wired Ethernet LAN via an access point. How many frames will be involved in this one-way transmission? A) 1 B) 2 C) 4 D) There will be one frame for each switch along the way. Difficulty: Deeper Question: 16b Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 53) A single access point, and the set of hosts it serves, is called a(n) ________. A) BSS B) BSSID C) ESS D) none of the above Difficulty: Basic Question: 17a Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology 54) In roaming, a wireless client moves from one ________ to another without losing its connection. A) ESS B) BSS C) SSID D) none of the above Difficulty: Basic Question: 17a Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 55) ________ have SSIDs. A) Wireless clients B) Wireless access points C) both A and B D) neither A nor B Difficulty: Basic Question: 17b Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 56) To use an access point, you need to know its ________. A) SSID B) BSSID C) ESSID D) Wi-Fi ID Difficulty: Basic Question: 17b Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology 57) Access points in the same ESS communicate via ________. A) wireless transmission B) the distribution system C) a master access point D) routers Difficulty: Deeper Question: 17c Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Application of Knowledge 58) In an extended service set, each access point ________. A) must have the same SSID B) must have a different SSID C) must have a coordinated SSID D) none of the above Difficulty: Basic Question: 17d Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology 59) To connect to an access point, you must know its ________. A) SSID B) ESSID C) IP address D) Wi-Fi ID Difficulty: Basic Question: 17d Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology 60) If there is an access point that serves eight wireless hosts, on how many channels will these devices transmit and receive during the course of an hour or two? A) 1 B) 2 C) 8 D) 9 Difficulty: Basic Question: 18a Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 61) ________ is a technique for preventing two wireless stations from interfering with each other by transmitting at the same time. A) Creating extended service sets B) Roaming C) The distribution system D) Media access control Difficulty: Basic Question: 18b Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology 62) Media access control governs transmission by ________. A) access points B) wireless hosts C) both A and B D) neither A nor B Difficulty: Basic Question: 18c Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 63) Within a BSS (and without MU-MIMO), the access point and a wireless host it serves can transmit at the same time. Difficulty: Basic Question: 18d Objective: Describe 802.11 Wi-Fi operation with access points. AACSB: Applying Information Technology, Analytical Thinking 64) In CSMA/CA, CS means ________. A) cancel sending B) counter-source C) carriage suspension D) carrier sense Difficulty: Basic Question: 19a Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology 65) In CSMA/CD+ACK, when a wireless NIC wishes to transmit, it listens for traffic. If there is traffic, it waits. When the traffic stops, it may transmit immediately. A) always true B) sometimes true C) always false Difficulty: Deeper Question: 19b Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 66) When a receiver transmits an ACK, ________. A) it must use CSMA/CA B) it must use CSMA C) in must use CA D) it must transmit immediately Difficulty: Deeper Question: 19d Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Application of Knowledge 67) CSMA/CA+ACK is ________. A) unreliable B) reliable C) semireliable Difficulty: Basic Question: 19e Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology 68) Which is one of the only two reliable protocols we have seen this term? A) IP B) CSMA/CA+ACK C) UDP D) 802.3 Difficulty: Basic Question: 19f Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 69) In ________, when a wireless host wishes to send, it first sends a message to the wireless access point asking for permission to send. When the access point sends back a response, the host sending the original message may transmit. All other hosts must wait. A) CSMA/CA+ACK B) CSMA/CA C) CSMA/CD D) RTS/CTS Difficulty: Basic Question: 20a Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Application of Knowledge 70) The 802.11 standard has two mechanisms for media access control. Of the two, ________ is mandatory. A) MAC B) CSMA/CA+ACK C) RTS/CTS D) CSMA/CD Difficulty: Basic Question: 20b Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology 71) Which of the following is more efficient and faster? A) CSMA/CA+ACK B) RTS/CTS C) Both are about equally efficient and fast. Difficulty: Basic Question: 20d Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Application of Knowledge 72) When does it make sense to use RTS/CTS? A) when all devices can hear each other B) when not all of the devices can hear each other C) when efficiency is crucial D) always Difficulty: Medium Question: 20e Objective: If you have read the More Information box, "Media Access Control," describe how MAC operates. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 73) Wider channel bandwidth ________. A) increases transmission speed B) allows more channels to be used in a service band C) both A and B D) neither A nor B Difficulty: Basic Question: 21 Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 74) ________ is among the most widely used 802.11 transmission standards used today. A) 802.11g B) 802.11ac C) both A and B D) neither A nor B Difficulty: Basic Question: 22a Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology 75) Today, Wi-Fi sales are dominated by ________. A) 802.11a B) 802.11g C) 802.11n D) 802.11ac Difficulty: Basic Question: 22b Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology 76) Individual throughput for users of an access point ________. A) depends on how many users are sharing the access point B) depends on your distance from the access point C) both A and B D) neither A nor B Difficulty: Deeper Question: 23a Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 77) As your wireless client travels away from an access point, ________. A) errors begin to increase B) your transmission speed decreases C) both A and B D) neither A nor B Difficulty: Deeper Question: 23b Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 78) MIMO ________. A) bonds two or more channels for higher speed B) is used in all forms of 802.11 C) uses a single spatial stream but multiple signals D) transmits multiple signals in the same channel Difficulty: Deeper Question: 24a Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 79) MIMO ________. A) increases throughput B) lowers propagation distance C) both A and B D) neither A nor B Difficulty: Basic Question: 24b Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 80) MIMO ________. A) increases transmission speed B) increases transmission distance C) both A and B D) neither A nor B Difficulty: Basic Question: 24c Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 81) Beamforming can allow an access point to ________. A) focus power on individual clients B) send signals to two different clients at the same time C) both A and B D) neither A nor B Difficulty: Deeper Question: 25a Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology, Application of Knowledge 82) An access point can transmit to more than one wireless client at a time with ________. A) bonding B) MIMO C) Multiuser MIMO D) CSMC/CA+ACK Difficulty: Basic Question: 25b Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology 83) Which of the following allows access point transmission two wireless clients simultaneously? A) CSMA/CA+ACK B) MIMO C) MU-MIMO D) none of the above Difficulty: Basic Question: 25c Objective: Compare and contrast 802.11n and 802.11ac. AACSB: Applying Information Technology 84) If an 802.11n client tries to use an 802.11ac access point, ________. A) they will not be able to communicate B) they will communicate using 802.11n C) they will communicate using 802.11ac D) either B or C Difficulty: Deeper Question: 26a Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 85) Because of ________, an 802.11AX access point can communicate with an 802.11AY client. A) MIMO B) MU-MIMO C) backward compatibility D) They CANNOT communicate. Difficulty: Basic Question: 26c Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 86) An 802.11ac Wi-Fi compatibility testing profile contains ________ of the features of the 802.11ac. A) all B) nearly all C) some D) none Difficulty: Basic Question: 27a Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Application of Knowledge 87) If two products both comply with 802.11 ac, their performance will always be similar. Difficulty: Deeper Question: 27a Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 88) What is the main promise of 802.11ax over 802.11ac? A) higher speed B) the ability to serve more users C) MIMO D) Mu-MIMO Difficulty: Basic Question: 28a Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Application of Knowledge 89) The 60 GHz unlicensed service band offers ________ compared to lower-frequency service bands. A) more speed per channel B) greater propagation distance C) greater ability to penetrate walls D) all of the above Difficulty: Deeper Question: 28b Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Application of Knowledge 90) Which of the following works in the 60 GHz unlicensed service band? A) 802.11ac B) 802.11ad C) 802.11ax D) all of the above Difficulty: Deeper Question: 28b Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology 91) The main problem with the 60 GHz unlicensed band is that ________. A) it cannot be used outside B) it does not support MIMO C) transmission speed is low D) transmission distance is short Difficulty: Basic Question: 28c Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Analytical Thinking, Application of Knowledge 92) Which of the following is true of 802.11ay over 802.11ad? A) greater propagation speed B) greater propagation distance C) both A and B D) neither A nor B Difficulty: Deeper Question: 28d Objective: If you read the More Information box, "802.11/Wi-Fin Notes," discuss backwards compatibility, profile waves, and emerging 802.11 Wi-Fi standards. AACSB: Applying Information Technology, Application of Knowledge [Show More]

Last updated: 1 year ago

Preview 1 out of 24 pages