USI Module 12 Questions and Answers Already Passed

Document Content and Description Below

USI Module 12 What does the term "sense and avoid" used in the UAS industry mean? - ✔✔Describes the UAS' ability to self-separate from other aircraft While commands are sent from the remote pil... ot, what is sent from the aerial vehicle? - ✔✔Data An example of contingency planning is a ______________________ - ✔✔lost communications flight plan What term explains the aspect of someone being in the Ground Control Station (GCS) and controlling the UAV? - ✔✔Human in the loop Receiving information critical to the operation of an aircraft is a function of _______________ - ✔✔Display design The term used when a person is involved in the overall action, but is removed from the control loop, allowing autonomous systems to function with infrequent or no human intervention, is ____________________ - ✔✔Human on the loop The payload operator and remote pilot in control (RPIC) work together to get the best imagery (True or False) - ✔✔True During UAS flight operations, who should communicate externally with guests, FAA, first responders, the customer, and/or the company while the aircraft is airborne? - ✔✔Any member of the UAS crew, besides the remote pilot in command (RPIC) In the event of lost communications, an orbit is when an Unmanned Aerial Vehicle (UAV) flies a circular pattern until the UAV is reacquired (also known as a loiter location) (True or False) - ✔✔True A human in the ground control station (GCS), controlling the AV is known as ________________ (answer is NOT PMTC/RPIC) - ✔✔Human in the loop A remote pilot communicates back and forth with the UAS using _____________ - ✔✔a telemetry interface Unmanned aircraft displays are based, to a certain extent, on manned aircraft displays (True or False) - ✔✔True What device provides a remote pilot data from the air vehicle to indicate a dangerous or irregular flight condition? - ✔✔Warning lights and annunciator alarms The primary responsibility of a launch and recovery crew is to fly the aircraft to a point where it can be handed off to another control element that will take it from there and fly the mission (True or False) - ✔✔True What does a display system in a ground control station provide the remote pilot? - ✔✔Situational awareness The primary function of a ground control station is to _________________ - ✔✔control the unmanned aircraft When you map an area virtually and program it into your UAS, you are ensuring that the air vehicle flies ________________ - ✔✔in a designated region As defined by the Federal Aviation Administration, what does the ground control station control? - ✔✔The flight path Geo-fencing is mapping a geographical area so you, the remote pilot, can fly the UAS with proper clearances and safety protocols in place (True or False) - ✔✔True Semi-autonomous flight of a UAS, where the AV is flown on autopilot, is called _____________________ - ✔✔Human out of the loop As a remote pilot planning an upcoming flight you use METARS for imagery-centric maps to conduct a terrain analysis (True or False) - ✔✔False What is a geographic location programmed is sequence for a route of flight? - ✔✔A waypoint During pre-flight preparations, you must anticipate the event of a lost link due to radio frequency communications failure. To be ready, you can program the communication to automatically switch to _____________________________ - ✔✔Satellite communication A manned flight deck and a UAS remote pilot display does not have which of the following? - ✔✔Signal strength [Show More]

Last updated: 1 year ago

Preview 1 out of 3 pages